Are you an avid traveler and outdoor enthusiast looking for the perfect solution to taking your kayak on RV trips? Look no further, because in this blog post, we will be walking you through step by step on how to build a kayak rack for your RV. Whether you are exploring national parks or camping by a serene lake, having a kayak with you adds another level of adventure to your travels.
However, transporting this watercraft can be challenging if you do not have enough space inside your RV. But fear not, our guide on how to build a kayak rack for an rv will help you maximize your storage options and make traveling with your beloved kayak hassle-free! So let’s dive in (pun intended) and get started on building the ultimate DIY kayak rack for your RV.
Needed Tools and Materials
- Measuring Tape
- Drill and Drill Bits
- Screws (depending on the type of material used for your RV)
- 2×4 Wood Boards
- Jigsaw or Handsaw
- Sandpaper
- Paint or Stain (optional)
- Foam Padding (for added protection of your kayak)
- Bungee Cords or Tie-down Straps
11 Step-by-step Instructions on How to Build a Kayak Rack for an RV
Step 1: Measure Your RV’s Roof
The first step in building a kayak rack for your RV is to measure the length and width of your RV’s roof. This will determine how long and wide you need your kayak rack to be. It’s best to have a slightly wider kayak rack than your RV’s roof to ensure stability and make room for any future modifications.
Step 2: Cut the Wood Boards
Using a jigsaw or handsaw, cut your 2×4 wood boards to the desired length. Make sure to measure twice and cut once for accurate results. You will need four long boards for the base and four shorter boards for the sides of your kayak rack. But you can always adjust the number of boards depending on your RV’s roof size.
Step 3: Create the Base
Take two of the long wood boards and lay them parallel to each other, with a gap between them that is slightly wider than your kayak. Then, place the shorter wood boards perpendicular to these longboards, forming a rectangle. Use screws to attach all four boards together, creating the base of your kayak rack.
Step 4: Add Support Beams
For added stability and weight distribution, cut two smaller pieces of wood and attach them vertically at each end of the base using screws. These will act as support beams for your kayak rack. If your RV’s roof is longer than the base, you can add more support beams in between for extra security.
Step 5: Sand Down Rough Edges
Using sandpaper, smooth out any rough edges or splinters on your wood boards. This step is crucial to prevent any damage to your kayak during transport. It’s also an excellent opportunity to paint or stain your wood boards if desired. The added layer of protection will help your kayak rack withstand different weather conditions.
Step 6: Attach the Foam Padding
To protect your kayak from scratches or dents, attach foam padding on the top surface of your base using glue or screws. Make sure to use enough padding to cover the entire length and width of your base, as well as any areas that may come into contact with your kayak.
Step 7: Attach the Kayak Rack to Your RV’s Roof
With the help of a friend, carefully lift and place the kayak rack on top of your RV’s roof. Make sure it is centered and securely attached to your RV using screws. You can also use additional straps or bungee cords for added stability. This step may require a ladder, so make sure to have one on hand.
Step 8: Test for Stability
Before hitting the road, it’s essential to test the stability of your kayak rack. Apply some weight or pressure on different areas of the rack to ensure it can withstand the weight of your kayak during travel. It’s also a good idea to test the stability while driving at different speeds.
Step 9: Install Hooks for Paddles or Gear
If you have extra wood boards, you can attach them vertically on one side of your kayak rack to create hooks for storing your paddles or other gear. This step is optional and can be skipped if you prefer to store your gear inside your RV. You can also add hooks or straps on the base of your kayak rack to secure any gear or supplies.
Step 10: Load Your Kayak
Once the kayak rack is installed and tested, it’s time to load your kayak. Carefully lift and place your kayak on top of the rack, making sure it is centered and secured with straps or bungee cords. You can also use foam padding or towels between the bottom of your kayak and the base for added protection.
Step 11: Hit the Road and Enjoy!
Congratulations, you have successfully built a kayak rack for your RV! Now it’s time to hit the road and enjoy your next adventure with your beloved kayak in tow. Make sure to regularly check the stability of your rack during travel, and make any necessary adjustments if needed.
So there you have it, a step-by-step guide on how to build a kayak rack for an rv. With just a few materials and some basic tools, you can create a sturdy and reliable kayak rack for all your future travels. Happy kayaking!
How Much Could It Cost?
The cost of building a kayak rack for an RV can vary depending on the type and quality of materials used. On average, it may cost anywhere from $50 to $100 for the wood boards, screws, foam padding, and other necessary supplies. However, this is still significantly cheaper than purchasing a pre-made kayak rack specifically designed for RVs.
Safety Tips
- Always Use Proper Safety Equipment, Such as Gloves and Goggles, When Handling Tools and Materials.
- Make Sure to Secure the Kayak Rack Tightly on Your Rv’s Roof Before Hitting the Road.
- Regularly Check the Stability of Your Kayak Rack During Travel and Make Any Necessary Adjustments.
- Be Aware of Any Height Restrictions While Driving With a Kayak on Top of Your Rv.
- Always Follow Traffic Laws and Drive Cautiously When Transporting a Kayak on Your Rv.
Frequently Asked Questions
Q1: Can I Use This Kayak Rack for Other Types of Watercraft?
A1: Yes, you can modify the dimensions of the base to fit other types of watercraft such as canoes or paddleboards. You can also use this kayak rack for non-RV vehicles like trucks or trailers.
Q2: How Much Weight Can This Kayak Rack Hold?
A2: The weight capacity of the kayak rack will depend on the strength of your RV’s roof and the materials used. However, with proper installation and regular maintenance, it should be able to hold at least one standard-sized kayak.
Q3: Do I Need to Remove the Kayak Rack When Not in Use?
A3: It is recommended to remove the kayak rack when not in use to prevent any damage or wear and tear on your RV’s roof. However, if you plan on using it frequently, make sure to regularly check the stability and make any necessary repairs or adjustments as needed. So, it is always better to remove the rack when not in use.
Q4: Can I Build a Kayak Rack Without Using Wood?
A4: It is possible to build a kayak rack using other materials such as PVC pipes or metal bars. However, these may require more advanced tools and techniques for installation. It’s best to stick with wood if you are a beginner or have limited resources.
Overall, the most important thing is to ensure that your kayak rack is sturdy, stable, and able to safely transport your watercraft during travel. So choose the material that works best for you and follow the steps outlined in this guide for successful results. Happy building!
Conclusion
In conclusion on how to build a kayak rack for an rv, building a kayak rack for your RV can be a fulfilling and practical project to take on. By following these steps and tips, you can easily create a sturdy and reliable kayak rack that will enhance your RV travel experiences. Remember to always prioritize safety and make sure to test out the rack before hitting the road.
Whether you’re an experienced RVer or someone looking for new ways to enjoy the great outdoors, having a kayak rack on your RV opens up endless possibilities for exploration. So why not get started today and see where your kayaks can take you? Share your journey with us and inspire others to embark on their own adventures. Now go forth and build that perfect kayak rack for your RV! Happy travels!